MAINTENANCE

Properly following cleaning and maintenance tips, enjoy your floors in top condition.

CLEANING AND MAINTENANCE:

Although Tarimatec ® flooring is maintenance, it is recommended to periodically clean the facility to keep her looking good. Use soap or water jet machine and water pressure (max. 80 bar), use wide jet and run the water in the direction of the grooved flooring, avoid circular motions. For any stain act as quickly as possible to prevent surface absorption.

FOR STUBBORN STAINS:

Oils, food stains, sun block: Clean with a mixture of hot water and detergent or degrease, rub, leave for a few minutes and then rinse with water. If the stain persists, use a stain remover for cleaning tissues, following the product instructions. If it has penetrated the flooring, you can sand the surface with fine sandpaper or wire brush, always in the direction of grooving.

There are spots that gradually disappear with the passage of time, water and sun. The stage is not resistant to acetone, strong acids, silicones and paints. It is recommended not to mount the dais in barbecue areas.

FOR DEEPER STAINS:

Cigarettes, coal, stripes: Sand the surface with fine sandpaper or wire brush, always in the direction of grooving. If sanding appears a slight difference in tone, this will be matched after a short period of time.

Copyright © 2017 Tarimatec USA. All Rights Reserved